Publications  

Publications

Publications

Publication List of Department of Mechanical Engineering

  1.      R. Muhammad, “2014 Oil Plunge: Causes and Impacts on Renewable Energy”. Renewable and Sustainable Energy Reviews, 2017, 68:1, pp 609-622.
  2.      R. Muhammad , Dr. N. Ahmad, Dynamic Behavior of β-Ti-15333 in Ultrasonically Assisted Turning Experimental and Numerical Analysis,”Scientia Ianica Journal”, 2016. Paper accepted for publication.
  3.      R. Muhammad, Muhammad Irfan. Experimental and Numerical Analysis of Nanoindentation of Ti-6246 Alloy         Journal Particular Science and Technology 2016 Submitted for Publication.
  4.      F. Khan, Izhar, “Piezoelectric type acoustic energy harvester with a tapered Helmholtz cavity for improved performance “. Journal of Renewable and Sustainable Energy, 2016. 8:5. pp 1-22.
  5.      R. Muhammad ,”Effect of Machining on Shear-Zone Microstructure in Ti-15V-3Cr-3Al-3Sn: Conventional and Ultrasonically Assisted Turning. “Journal of Materials Engineering and Performance, 2016. 25:9, pp 3766-3773.
  6.      R. Muhammad, N. Ahmed, “Analysis of tool wear in ultrasonically assisted turning of β-Ti-15V-3Al-3Cr-3Sn alloy”. Scientia Iranica, 2016. 23:4, pp 1800-1810.
  7.      M. Aamir, R. Muhammad, M.I. Hanif, N. Ahmed, “Relationships between Microstructure and Mechanical Properties in High Sn Content Pb-based and Pb-Free Solder Alloy after Thermal Aging”. International journal of Advanced Materials and Manufacturing, 2016. 1:1, pp 33-41
  8.      M. Irfan Khan, R. Muhammad, “Hardness Analysis of Ti-6Al 2Sn 4Zr 6Mo using Vickers and Micro Vickers Indentation Tests.” International Journal of Innovative Science, Engineering & Technology, 2016. 3:9, pp 78-84.
  9.      M. Aamir, R. Muhammad, M.I. Hanif, N. Ahmed,”Design and Development of Low Cost Compact Force Dynamometer for Cutting Forces Measurements and Process Parameters Optimization in Turning Applications. “International Journal of Innovative Science, Engineering and Technology, 2016. 3:9, pp 306-316.
  10.  S. Rehman, S.Q. Hussain , W.Gul and Israr,” Characterization of Advanced Encryption Standard (AES) for Textual and Image data”. International Journal of Engineering and Computer Science, 2016. 5:10,  pp 18346-18349
  11.  W.Gul, A.Khan,   and A. Shakoor, “Investigation and Analysis of Tamarix aphylla(Ghaz wood) and Populuscaspica (poplar wood) used as Raw Materials for Manufacturing of Medium Density Fiberboard (MDF)”. Journal of Advanced Material Sciences (JAMS), 2016. pp 28-35
  12.  W.Gul, A.Khan,   and A. Shakoor,”Impact of Fiber Separation Quality on Medium Density Fiberboard (MDF) Physical and Mechanical Properties”. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, 2016. pp 1-11.
  13.  W.Gul, A.Khan,   and A. Shakoor, “Impact of Hot Pressing Temperature on Medium Density Fiberboard”. Journal of Advances in Material science and Engg, 2017.  pp 1-6
  14.  U. Haq, Izhar, K. Shah, S. Anwar, M. T. Khan, B. Ahmed, S. Maqsood,”Fuzzy Logic Based Failure Mode and Effect Analysis of Automotive Powertrain Assembly Systems”. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, 2015. 20:2, pp 57-64
  15.  Izhar, I. U. Haq, Kamran Shah, M. T. Khan, K. Azam, S. Anwar, “Fuzzy Logic Based Edge Detection for Noisy Images”. Technical Journal, University of Engineering and Technology (UET) Taxila, Pakistan, 2015. 20:2, pp 81-86
  16.  K. Alam, M. Khan, R. Muhammad, S.Z. Qamar, V.V. Silberschmidt, “In-vitro experimental analysis and numerical study of temperature in bone drilling”. Technology and Health  Care, 2015.  23:6, pp 775-783
  17.  M. Aamir, R. Muhammad, M. Sadique, K. Alam and N. Ahmed ,”Thermal Aging Effect on the Intermetallic Particles and Mechanical Properties of 96Sn-04Pb Solder Alloy”. Journal of Advanced Materials Science, 2015. 1:1, pp 22-27.
  18.  K. Alam, R. Muhammad and VV Silberschmidt, “In-Vitro Experimental and Numerical Analysis of Forces in Plane Cutting of Cortical Bone”. Applied Mechanics and Materials. 2015. 799:800, pp 509-514
  19.  Rafiq A., Arshad- A. K., M. Aamir, M.I. Hanif, “Learning the selection of Engineering Design tools and Methods through Snakes and Ladders Game for Bachelors Engineering Projects”. International Journal of Technology and Engineering Education. 2015.
  20.  F. Khan and Izhar,”An Improved Design of Helmholtz Resonator for Acoustic Energy Harvesting Devices”. IEEE International Conference on Intelligent Systems Engineering, ICISE 2016. pp 320-325.
  21.  Izhar, Fayyaz, R. Muhammad and N. Ahmed,”An Intelligent Approach for Edge Detection in Noisy Images using Fuzzy Logic”. Fourth International Conference on Aerospace Science & Engineering (ICASE 2015).  pp 243-248
  22.  N. Khan, A. Shakoor, R. Muhammad, N. Ahmed and V.V. Silberschmidt,”Finite Element Simulation of Bullet Resistant Composite Body Armor”. Fourth International Conference on Aerospace Science & Engineering (ICASE 2015).  pp 74-78
  23.  Rehman, R. Muhammad, S. Maqsood and N. Ahmed, “Finite Element Analysis of Tool Wear in Ultrasonically Assisted Turning”. Fourth International Conference on Aerospace Science & Engineering (ICASE 2015).  pp 64-68
  24.  W.Gul, A.Khan,   and A. Shakoor,”Improving Physical and Mechanical Properties of Medium Denisty Fiberboard (MDF)”. Fourth International Conference on Aerospace Science & Engineering (ICASE 2015). 2015.
  25.  M. Aamir, R. Muhammad, N.  Ahmed and K. Alam,”Impact of Thermal Aging on Microstructure and Mechanical Properties of high Sn Content, Sn-Pb Solders”. Fourth International Conference on Aerospace Science & Engineering (ICASE 2015), 2015.  pp 187-191.
  26.  N Ahmed, MS Zafar,”Nanomechanical characterization of exfoliated and retained deciduous incisors”. Technology and Health Care. 2014. Vol 22.  pp 785-793
  27.  HA Wajid, N Ahmed, H Iqbal, MS Arshad,”Modified Finite Difference Schemes on Uniform Grids for Simulations of the Helmholtz Equation at Any Wave Number”. Journal of Applied Mathematics. 2014.  pp 9
  28.  K Alam, IM Bahadur, N Ahmed,”Cortical bone drilling: An experimental and numerical study”. Technology and Health Care. 2014.
  29.  M S Zafar, Ahmed N, “Therapeutic roles of fluoride released from restorative dental materials.”. Fluoride. 2015. Vol 48 (2).
  30.  MS Zafar, M Alrahabi, N Ahmed,”Effect of handpiece speed on the performance of preclinical training of undergraduate dental students”. Journal of Taibah University Medical Sciences, 2015.  Vol 10 (1).
  31.  M S Zafar, Ahmed N,”The effects of acid etching time on surface mechanical properties of dental hard tissues”. Dental Materials Journal, 2015.
  32.  A Maurotto, C Siemers, R Muhammad, A Roy, V Silberschmidt, “Ultrasonically assisted turning of Ti alloy with enhanced machinability”. Metallurgical and Materials Transactions A, 2014. Vol 45(6), pp 2768-2775
  33.  R Muhammad, A Maurotto, M Demiral, A Roy, VV Silberschmidt, “Thermally enhanced ultrasonically assisted turning of Ti-15333 alloy”. CIRP Journal of Manufacturing Science and Technology, 2014. Vol 7(2), pp 159-167
  34.  Rafiq A, “Generation of safe tool-path for 2.5D milling/drilling machine-tool using 3D ToF sensor”. CIRP Journal of Manufacturing Science and Technology, 2015.
  35.  Rafiq A, “Towards a safe peg-in-hole process using Time-of-flight sensor”. Sylwan Journal, 2015.

Publication List of Department of Civil Engineering

  1.      Prof. Dr. Riaz A. Khattak, “Assessment of Toxic Metals in Dairy Milk and Animal Feed in Peshawar, Pakistan.”. Sciencedomain International, 2014.Vol 4(8), pp 883-893.
  2.      Prof. Dr. Riaz A. Khattak,”Humic Acid and Micronutrient Effects on Wheat Yield and Nutrients uptake in Salt Affected Soils.”.  Int. J. Agric Biol, 2014.Vol 16, pp 991-995.
  3.      Prof. Dr. Riaz A. Khattak, “Sugar beet (Beta vulgaris L.) response to diammonium phosphate and potassium sulphate in saline field conditions.”.  Journal Soil Use and Management, 2014. Vol 30, pp 320-327.
  4.      Prof. Dr. Riaz A. Khattak, “Interaction of phosphorus and potassium on maize (Zea mays L.) under saline-sodic soil conditions”. Journal of Agricultural Science, 2015. Vol 7(3), pp 66-78.
  5.      Prof. Dr. Riaz A. Khattak, “Effect of saline irrigation water on the growth and chemical composition of wheat (Triticum aestivum L.) and the leachability of salts from saline-sodic soil supplemented with phosphorus and potassium”. Journal of Soil Science and Plant Nutrition, 2016. Vol 16(3), pp -604-620.
  6.      Engr. Haris Alam, Engr. Naveed Ali, Engr. Fasih Ahmad Khan, “Utilization of Waste Glass as a Partial Replacement of Cement in Concrete”. International Journal of Advanced Structure and Geotechnical Engineering, 2015. Vol 4(3), pp 181-185.
  7.      Engr. Haris Alam, Engr. Naveed Ali, Engr. Fasih Ahmad Khan, “Seismic Response of Base Isolated Structure Versus Fixed Based Structure during Strong Ground Motions”. International Journal of Advanced Structure and Geotechnical Engineering, 2015. Vol 4(3),  pp 193-197.
  8.      Engr. Shamsul Islam, “Pre-Saturated Sawdust as a Source of Internal Curing in High Performance Concrete”. Bhasha Research Corps, 2015. Vol 4(2),  pp 109-116 .
  9.      Engr. Haris Alam, “Effect of Precompression and Mortar Ratios on the In-Plane Shear Strength of Unreinforced Brick Masonry”. International Journal of Advanced Structures and Geotechnical Engineering, 2016. Vol 5(3), pp 78-82.
  10.  Dr. Noorul Amin, “Srakanda (Saccharum spontaneum) reinforced concrete slab used in a suspended wall”. Technical Journal UET Taxila, 2015.    
  11.  Dr. Noorul Amin, “Steel piled pile foundation for emergent construction”. CURJ City University Peshawar, 2015.

Publication List of Department of Electrical Engineering

  1.      Meharban Khan, Zahid Ullah, Qazi Muddussir, and Sarmad Ullah Khan, “Address Resolution Protocol Caching in Optimized RAM-Based CAM”. “International Journal of Computer Science and Information Security (IJCSIS). 2016. Vol 14(8), pp 1014-1018
  2.      Enrg. Alishpa Khattak, Zahid Ullah, “Analysis and Optimization of Radial Distribution Network Using GIS and GPS Techniques       “. International Journal of Computer Science and Information Security 2016, Vol 14(11) pp 1-6.
  3.      Dr. Sarmad Ullah Khan, “Energy Saving through Proxying Applications on behalf of Idle Devices”. Procedia Computer, 2016. Vol 83, pp 187-194
  4.      Muhammad Bilal, Rizwan Ullah, Abdar Ali, Muhammad Hilal Khan, and Zahid Ullah, “Wheeling Hybrid Energy System for Industries”. IEEE International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), Quetta, Pakistan, 2016. pp 169-174.
  5.      Azhar Qazi, Zahid Ullah, Khalid Rehman, Muhammad Hilal Khan, and Muhammad Bilal, “Optimization of access latency in DRAM”. IEEE International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), Quetta, Pakistan, 2016.  pp 163-168
  6.      Engr. Rizwanullah, Abdar Ali, Dr. Zahid Ullah, “Zero Voltage Switched Full Bridge Convertors for the Battery Charger of Electric Vehicle”. International Conference on Power Systems Engineering, 2016.  pp 1046-1055.
  7.      Engr. Dawar Awan, “Frequency domain based controller design for dc-dc buck converter”. Applied Sciences and Technology (IBCAST), 2015 12th International Bhurban Conference, 2015. pp 146-151.
  8.      Engr. Dawar Awan, “Printed UWB Antennas having Band Notch Feature”. “A Review,” Proceedings of the Pakistan Academy of Science, 2015. Vol  52(1), pp 39-52
  9.      Engr. Khalid Rehman, “Detail Survey of Cognitive Radio communication system”. First International Conference on Emerging Trends in Engineering, Management and Sciences” December 28-30, 2014 (ICETEMS-2014) Peshawar, Pakistan, 2014.
  10.  Engr. Shaheer Durrani, “Analysis of Trend of Installing Solar Street Lights in Peshawar Cantonment Areas”. First International Conference on Emerging Trends in Engineering, Management and Sciences” December 28-30, 2014 (ICETEMS-2014) Peshawar, Pakistan, 2014.
  11.  Engr. Mansoor Habib, “Information with the blink of an eye: Making Smart Care More Intelligent and User Friendly “. First International Conference on Emerging Trends in Engineering, Management and Sciences” December 28-30, 2014 (ICETEMS-2014) Peshawar, Pakistan, 2014.
  12.  Prof. Dr. Azzam ul Asar, “Analysis & Design of Parabolic Through Solar Thermal Power Plant for Typical Sites of Pakistan”. IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE), 2014.   Vol. 9, No.3.  pp 116-122
  13.  Dr. Sarmad Ullah Khan, “Online Authentication and Key Establishment Scheme for Heterogeneous Sensor Networks”. International Journal of Distributed Sensor Networks, 2014. Vol 2014, Article ID 718286.  11 pages.
  14.  Dr. Sarmad Ullah Khan, “A Secure On-Line Key Establishment Scheme for Mobile Heterogeneous Sensor Networks”. International Journal of Distributed Sensor Networks, 2014.  Vol Article ID 925479, 12 pages.
  15.  Dr. Sarmad Ullah Khan, “Content Security in Content Centric Networks”. The 10th International Conference on Security and Privacy in Communication Networks (Securecomm-2014), Beijing China, 2014.
  16.  Dr. Sarmad Ullah Khan, “Location Identity Based Content Security Scheme for Content Centric Networks”. The 7th International Conference on Security of Information and Networks (SIN’14), Glasgow, UK, 2014.
  17.  Engr. Mansoor Habib, “Making Vehicles Remote Controlled for Special People using AT89c51”. International Journal of Electronics Communication and Computer Engineering, 2014.  Vol 5(6).  pp 1316-1321.
  18.  Engr. Khan Muhammad, Engr. Bilal Wadood, “The Effect of Malicious Nodes on Tor Security”. International Conference on Applied Research in Computer Science and Engineering (ICAR), 2015, pp 1-5.
  19.  Abdar Ali, Rizwan Ullah, Zahid Ullah, “DC-to-DC Convertors for Low Voltage High Power Renewable Energy Systems”. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 2015.Vol 9(12).  pp 1343-1366
  20.  Engr. Zaheer ud din, “A Numerical Solution Technique of ID Fredholm Integral Equation having Oscillatory Kernel with Stationary Points” “. International Conference on Differential Equations and Applications, LUMS Lahore. May, 2016.
  21.  Engr. Amjad Iqbal, “Design of Compact and Miniature asymmetric SIR-DRA Filter-antenna subsystem”. Journal of Electromagnetic Waves and Applications, 2016.Vol 30(16), pp 2174-2184.
  22.  Dr. Liaqat Ali, “New Version of Optimal Homtopy Asymptotic Method for the solution of Nonlinear Boundary Value Problems in Finite and Infinite Intervals”. Alexandria Engineering Journal, 2016.Vol 55(1),  pp 2811-2819
  23.  Dr. Liaqat Ali, “Application of Modified Optimal Homtopy Pertubration Mehtod to Higher Order Boundary Value Problems in a Finite Domain”. Hacettepe Journal of Mathematics and Statistics. 2016. Paper submitted for publication.
  24.  Dr. Azzam ul Asar, “Analyzing Distributed Generation Impact on the Reliability of Electric Distribution Network”. International Journal of Advanced Computer Science and Applications, 2016.Vol 7(10).  pp 217-221.